Consolizing MV1FS/Z (Case design)
- Thread starter pierpa86
- Start date
mathewbeall
Enlightened
Looks really nice! Am looking forward to details!
mathewbeall
Enlightened
woohoo! really maximizing the build plate for a couple of those prints 
Hi at all !
This time my first mistake was in measuring the slot space, but it was easy to fix and even if the model has already been corrected I wanted to keep the initial print with a thickness.
For the space for the de15 connectors I left little space, I realize this but I still managed to mount the connectors. I will also fix this before releasing the model.
For the rest everything is wonderful, solid, functional and nice to look at.
All my models don't work with the original OMVS kit but just buy some simple connectors and solder them into the right pin. (much lower cost)
I will probably make an adaptation in the future, to begin with I hope to find the measurements of the kit in the official documentation.
Here the result of first model:
One more join the family..
This time my first mistake was in measuring the slot space, but it was easy to fix and even if the model has already been corrected I wanted to keep the initial print with a thickness.
For the space for the de15 connectors I left little space, I realize this but I still managed to mount the connectors. I will also fix this before releasing the model.
For the rest everything is wonderful, solid, functional and nice to look at.
All my models don't work with the original OMVS kit but just buy some simple connectors and solder them into the right pin. (much lower cost)
I will probably make an adaptation in the future, to begin with I hope to find the measurements of the kit in the official documentation.
Here the result of first model:
One more join the family..
Blazewind
Beginner
Great looking as usual! I'd love to do something like this since my MVS shell is beat to hell, but it would probably be a lot simpler in design since I'm not looking ton consolize them as I've got superguns.
Blazewind
Beginner
Nope, not the OMVS. I have the Minigun and HAS V5.0 Superguns, which connects to any arcade board via JAMMA Connector and providing AV out and controller inputs. It's an external standalone device. The OMVS is more similar to what you do where it's a kit with ports and open source PCB's to make get controller input and AV output from the MVS, but is internalized into the case.
You can find more detail on it here.
You can find more detail on it here.
Here my final design: 
I hope you enjoy and that can helps someone on their journey to consolize their mvs, you are free to edit the files and remix them for your favorite connectors.
I think my design journey on MVS end here, i have enough mvs to survive a zombie apocalypse.
3d-model here on MakerWorld= https://makerworld.com/en/models/514725
I hope you enjoy and that can helps someone on their journey to consolize their mvs, you are free to edit the files and remix them for your favorite connectors.
I think my design journey on MVS end here, i have enough mvs to survive a zombie apocalypse.
3d-model here on MakerWorld= https://makerworld.com/en/models/514725
subhuman
Beginner
Pier, your CMVS case design looks plain awesome. 
Wonder if you could also upload a version with the standard worldwide Neo-Geo logo? As it was in the original post. I appreciate you work! Cheers!
Wonder if you could also upload a version with the standard worldwide Neo-Geo logo? As it was in the original post. I appreciate you work! Cheers!sure, let me find it !Pier, your CMVS case design looks plain awesome.
Thanks for the kind words
subhuman
Beginner
Thank you so much for sharing the new updated file with the OG logo . I just made a couple of change to better accomodate my DIN9 video connector.
Just curious - what printer did you use for your original sample print?
I have a Bambu Labs A1 with AMS lite but given that this is a pretty average printer I don't know if there are any suggested settings I should consider besides using 0.2mm and 15% infill. Once again, much appreciated
. I just made a couple of change to better accomodate my DIN9 video connector.Just curious - what printer did you use for your original sample print?
I have a Bambu Labs A1 with AMS lite but given that this is a pretty average printer I don't know if there are any suggested settings I should consider besides using 0.2mm and 15% infill. Once again, much appreciated
HoblinGobs34
Beginner
i wonder, is there an guide on how to install any of the components? or is it kinda like how the mvs1c is?
LittleMegaGamer
Professional
Ciao Pierpa86,
I was just looking for MVS shell option, and your thread came up. Great job!
When you get a chance, could you share some photos of your MV1FZ project complete, showing all the external sides and what happens inside with the mobo fitted, please?
I have an MV1A (not consolized) with a broken case, and I am thinking that I might start a new consolizing project... I did an MV1FZ many years ago in the old-fashioned way, everything soldered and wired. I don't know if it could fit everything in your cool case.
I was just looking for MVS shell option, and your thread came up. Great job!
When you get a chance, could you share some photos of your MV1FZ project complete, showing all the external sides and what happens inside with the mobo fitted, please?
I have an MV1A (not consolized) with a broken case, and I am thinking that I might start a new consolizing project... I did an MV1FZ many years ago in the old-fashioned way, everything soldered and wired. I don't know if it could fit everything in your cool case.
I'm so happy to help dude, MV1A is really big cant fit in that shell.
Buy you can start from Step file that i share to project and check size.