CPS-3 Custom METAL Case
- Thread starter hursit
- Start date
Im working on it nowadays. But I will show it after all the cps3 cases are arrive to the buyers. I need feedbacks and test reports.Please show pictures of your CPS2 case if you decide to do one , im very interested
After that I will share the CPS2 case project
Mr. Glendale
Beginner
THE UNWAVERING FOCUS
Sorry for that. But I try to make it smaller. With the GD-rom it is impossible to make it smaller
The next case is CPS-2 but maybe I will release ST-V too at the same timeST-V is what I'm waiting to see. Keep up the good work!
There will be USB female mount on the back of the case (metal part) But I don't have any plan to create mounting point for 2.5" HDD in the case or out of the case.
I have been taken too much feedbacks to put 2.5" HDD inside the case, for the Dreamshell bios. I'll consider it.
But not for the USBGDRom. Because there is not enough space with USBGDROM and HDD together.
The CPS3 cases will go to Bending Machine tomorrow.
I had an accident with my finger yesterday. Im ok but little bit delay (1-2 days ) I was lucky actually, it could be worst. The 1ton press hit my finger but i have escaped at the last one second.. But it took my Nail
.
Im still on the production.. Iam cautious , but sometimes accidents happened. There is nothing to do 
Anyway, please check the Dreamcast pictures. You will see the USB female port for the USBGDROM. There will be SD card slot in another version.
You will see, power mount and Swap Disc switch hole, and ventilation holes on the floor
I had an accident with my finger yesterday. Im ok but little bit delay (1-2 days ) I was lucky actually, it could be worst. The 1ton press hit my finger but i have escaped at the last one second.. But it took my Nail
.Im still on the production.
. Iam cautious , but sometimes accidents happened. There is nothing to do
Anyway, please check the Dreamcast pictures. You will see the USB female port for the USBGDROM. There will be SD card slot in another version.
You will see, power mount and Swap Disc switch hole, and ventilation holes on the floor
are you basing your design off of the old USB GDROM with the external port?
MoppelTheWhale
Grand Master
that would be vital for me, i've got the new revision which has an internal port
well, the internal one should still fit, but you'd have to disassemble the case every time you wanted to change the USB stick, and without enough room in the case for a HDD you wouldn't be able to use one at all if the port was blocked off.
I will have a plan to put an extension USB cable between USBGDRom to Metal plate. Male to Female USB.(10-20cm )
Something like this.
Jdurg
Enthusiast
Wow. This is a very cool design and product you offering. Nice job! I still have my CPS3 setup in the original Capcom metal cage that I painted black myself. I have no need to pick this up for CPS3, but once the CPS1 multi is finalized and produced, I would love to pick up something to protect that raw PCB!
SmokeMonster
Champion
Beautiful work with these. I just wrote this up for RetroRGB.com, hopefully it helps you reach your goal: http://retrorgb.com/metal-capcom-cps-3-arcade-case.html
I'm really interested in the Dreamcast case too
I'm really interested in the Dreamcast case too
Thanks for your supportBeautiful work with these. I just wrote this up for RetroRGB.com, hopefully it helps you reach your goal: http://retrorgb.com/metal-capcom-cps-3-arcade-case.html
I'm really interested in the Dreamcast case too
I already start the production. I hope they will be ready to shipping, next week
