CPS1 adapter board for CPS2 digital AV PSA

[waali]

I've seen a few posts with people wanting a CPS1 adapter board for CPS2 digital AV kit so I thought it would be good to post that it is already available for those that didn't know.

@marqs85 published the adapter board on the digital AV github a while back.

Installation readme is here: https://github.com/marqs85/cps2_digiav/blob/master/board/cps1/doc/install.md

PCB gerber is here: https://github.com/marqs85/cps2_digiav/tree/master/pcb_cps1_adapter/gerber

BOM is here: https://github.com/marqs85/cps2_digiav/blob/master/pcb_cps1_adapter/doc/bom.xls

I haven't built the board myself but I have the pcb and parts on the way.

 

[waali]

 

[tacobell]

Would you happen to have extra boards or where one can print one? I’m also trying to install a cps2 digital av on a cps1 dash a board with hyper fighting. Greatly appreciate any help!

 

[waali]

Would you happen to have extra boards or where one can print one? I’m also trying to install a cps2 digital av on a cps1 dash a board with hyper fighting. Greatly appreciate any help!

I have extra but those I will eventually build then sell.

To make your own PCB download the gerber files and upload to https://jlcpcb.com/ or http://oshpark.com/

BOM has the needed parts. I mostly get my parts from digikey or rsonline.

 

[tacobell]

I’d like to purchase from you if you have an extra?

I have extra but those I will eventually build then sell.

 

[waali]

Sure. But it wont be for a long time. My new heating pad wont be here for months.

 

[tacobell]

no worries, I ended up zipping up the gerber files together and uploaded them to jlcpcb.com to give it a shot. Thanks for the help though!

 

[RickyTTT]

Anyone have 1 for sell??