babylon5wars
Beginner
So...I bought this consolized CPS2 with Darksoft Multi + Digital AV + dual USB controller adapters (build in) about two years ago. Worked great at first, but had to put it in storage for about a year. Cool, but low humid and clean environment. Pulled it out just the other day and found my picture is all sorts of messed up. (see attached)
I carefully opened the unit to look for broken solder joints or any wiring damage in general. Nothing immediately stood out, other than some concerns of the over all work quality (so if there are any reputable modders out there looking for a job to help fix my unit back up and perhaps "better" the work on it, hit me up). (Main example, other than mess of wires, the digital av only seems secured in place by the chips its attached to)
Any thoughts? My initial guess is a solder issue between the chips and digital av board given that its the only securing method used for the HDMI port. I have a jamma supergun on the way so I can test the picture out on my RGB scaler to help narrow things down.
Thanks for any assistance, its greatly appreciated.
I carefully opened the unit to look for broken solder joints or any wiring damage in general. Nothing immediately stood out, other than some concerns of the over all work quality (so if there are any reputable modders out there looking for a job to help fix my unit back up and perhaps "better" the work on it, hit me up). (Main example, other than mess of wires, the digital av only seems secured in place by the chips its attached to)
Any thoughts? My initial guess is a solder issue between the chips and digital av board given that its the only securing method used for the HDMI port. I have a jamma supergun on the way so I can test the picture out on my RGB scaler to help narrow things down.
Thanks for any assistance, its greatly appreciated.