GoldenGlover
Grand Master
Deciding to part with my CPS2 Darksoft Multi kit (using a USA/JP region a & B board). This kit it is the original version that has the audio fix done (see pictures) - sound is crystal clear. Kit is currently running an Avalaunch clean decrypted rom pack on a revision 7 B board that also contains fun extras/hacks such as training editions for certain fighters, along with modded game hacks such as Progear: Halfway to Hell.
Given this kit is working flawlessly as-is, I never got around to adding key writing ability. However, if you want to do so, I’m including an Arthrimus CPS2 Key Writing QSB w/wires absolutely free (comes with the wiring as well, see additional photos) should you ever want to run an encrypted rom set on this.
Case plastic is in good condition with no cracks on either the A or B board. Label is professionally printed vinyl that has been nicely applied to the B board (no label is underneath). The LCD holder is @twistedsymphony ‘s design that I had professionally 3D printed in resin & painted black to match the USA blue/black board scheme - notice the chrome reflecting off the bottom of the LCD holder in one of the pictures below).
The A board has a Papst 612 F2/L fan added for quiet operation.
As an additional bonus, you’ll also receive as pictured:
Sold for $950 shipped (PayPal F&F only) in the CONUS. Sorry, no international shipping at this time.
Positive feedback for me can be found throughout these boards. I pack *carefully* (read: properly!) and ship fast (typically within one business day) after receiving payment. I also provide you with packing photos & a tracking number prior to shipping. This should arrive to you in the same condition it leaves me!
Give this CPS2 setup some love with your cab/supergun of choice!
Given this kit is working flawlessly as-is, I never got around to adding key writing ability. However, if you want to do so, I’m including an Arthrimus CPS2 Key Writing QSB w/wires absolutely free (comes with the wiring as well, see additional photos) should you ever want to run an encrypted rom set on this.
Case plastic is in good condition with no cracks on either the A or B board. Label is professionally printed vinyl that has been nicely applied to the B board (no label is underneath). The LCD holder is @twistedsymphony ‘s design that I had professionally 3D printed in resin & painted black to match the USA blue/black board scheme - notice the chrome reflecting off the bottom of the LCD holder in one of the pictures below).
The A board has a Papst 612 F2/L fan added for quiet operation.
As an additional bonus, you’ll also receive as pictured:
- Original case clips (black color as issued by Capcom & will be attached to boardset)
- Original metal CPS2 A board feet (will be shipped loose & not attached to the A board!
- Original unused NOS Capcom USA cabinet decal sticker
Sold for $950 shipped (PayPal F&F only) in the CONUS. Sorry, no international shipping at this time.
Positive feedback for me can be found throughout these boards. I pack *carefully* (read: properly!) and ship fast (typically within one business day) after receiving payment. I also provide you with packing photos & a tracking number prior to shipping. This should arrive to you in the same condition it leaves me!
Give this CPS2 setup some love with your cab/supergun of choice!
Last edited:
