CPS2 Internal Pico PSU Wiring

[The_Vulgar_Ape]

Hi All,

I am trying to build a console-ised cps2 and was wondering if there is a wiring guide to internally wiring a Pico PSU inside CPS2 A Board. I am not sure how to exactly wire the PSU to the A Board. I did some searches but couldn't find any specific instructions. I've seen some photos of someone using the wires from the molex plug and soldering them near the Jamma harness pins (which I assume is to going to the grounds, +12V, and +5V pins), but no details or explanation as to what is going on.

Thanks in advance.

 

[The_Vulgar_Ape]

For Anyone that may search for this in the future. Please see the attached link with the information I was looking for.

http://www.neo-geo.com/forums/showthread.php?278851-Internal-PSU-wiring-for-CPS2

 

[ekorz]

For what it’s worth, using one of these would be pretty clean: CPS2 I/O Interface

add the marqs hdmi mod and some undamned usb decoders and that’s pretty much consolized.