FS Crowin Case Candy Cab (Jamma) - NJ 07748

[maiden2099]

Crowin Case Candy Cab - Jamma - Made by Crown/Samduska in 2002/2003 - $1750 - Local Pickup Only

• Standard Res 27" Monitor in really good shape, no burn in and vibrant color.
• Completely gutted and rewired.
• Jamma Hookups with CPS2 Harness (Button 4 is wired to both Jamma and CPS2)
• Stereo Audio through Jamma or Aux Cable
• New Audio amp and Pyle Speakers
• Power Strip wired into main switch for additional hookups.
• Test & Service Button inside cabinet door
• Hidden P1 & P2 Coin buttons under front control panel.
• Storage underneath for PCB's
• Blast City Repro Metal Control Panel
• Sanwa JLF Sticks and Sanwa Buttons
• Original Crown Control Panel included as well
• Monitor can be rotated for vertical games
  
  No Game - $1750
  With MisterCade - $2250
  With RGBPi on Raspberry Pi 4 - $2000

 

[bagheera369]

These are the ones with sides made of presboard, correct?

 

[maiden2099]

Yes, covered mine in Vinyl

 

[notsonic]

Could you take some pics of the underside of the original control panel? I'm curious about the joystick mounts.

GLWTS

 

[Maximus-Prime586]

Hey, I’m about 45 min up the road in north Jersey. Could you show a side profile view and share footprint dimensions please?

I’m guessing I can’t squeeze this in to my space but sorta hope I’m wrong

Thanks

 

[maiden2099]

Could you take some pics of the underside of the original control panel? I'm curious about the joystick mounts.

GLWTS

I had to cut the feet off standoffs to hold my JLF's in. These were made with crown joysticks in mind, wasn't able to find an adapter plate.

 

[maiden2099]

Hey, I’m about 45 min up the road in north Jersey. Could you show a side profile view and share footprint dimensions please?

I’m guessing I can’t squeeze this in to my space but sorta hope I’m wrong

Thanks

It's not as big as it looks. Its base 28" Wide by 27" Deep. Control panel makes it 35" Deep and its 59" Tall. It's also on casters to move around really easily.

 

[jermz1]

Could you take some pics of the underside of the original control panel? I'm curious about the joystick mounts.

GLWTS

 

[Mrhide]

This cab is basically what I have in mind for my 2 nanao 32inches.

The front is metal?

edit: answered myself: https://www.hard--candy.com/wiki/candy/CWC-203

 

[GeekMan1222]

I was today years old to learn the crowin case cabs used an injection molded plastic CP plate (not that I ever was curious enough to find out in the past).
I just figured it was a metal plate like most other cabs, neat

 

[Maximus-Prime586]

shoot, she's said no. I coulda made it fit, too. GLWS.

 

[maiden2099]

It's all good, let me know if she changes her mind.