mathewbeall
Enlightened
Well, this is a bit of a sad story, but I got a Hantarex Polo 25" shipped to me - in very good condition, and when it arrived, the neck tube was cracked - very very sad... 
So - I am trying to recoup some of the costs, and the chassis, etc. look to be in great shape - figured I would post here and see if anyone is intereested.
It's not tested - and as much as I hate to read that, and say it - it's true - I didn't even plug it in once I noticed the neck was wobbly - and probably a good thing, I am not sure what would have happened.
Here are a bunch of pics - the Frame, degausing coil, ground wire loom, remote board (although it looks like maybe some of the pots need to be replaced - I don't know if all should have that long rotator piece or not), etc. Everything but the tube itself. I also cut off the connector that is soldered to the tube - not sure if that is a hard to get connector, but might as well.
I am thinking $150 for everything, plus shipping if you aren't local. Let me know if thats crazy, and if you need better pictures.
So - I am trying to recoup some of the costs, and the chassis, etc. look to be in great shape - figured I would post here and see if anyone is intereested.
It's not tested - and as much as I hate to read that, and say it - it's true - I didn't even plug it in once I noticed the neck was wobbly - and probably a good thing, I am not sure what would have happened.
Here are a bunch of pics - the Frame, degausing coil, ground wire loom, remote board (although it looks like maybe some of the pots need to be replaced - I don't know if all should have that long rotator piece or not), etc. Everything but the tube itself. I also cut off the connector that is soldered to the tube - not sure if that is a hard to get connector, but might as well.
I am thinking $150 for everything, plus shipping if you aren't local. Let me know if thats crazy, and if you need better pictures.
