What's new
By:

FS FS: 3d printed repro Sega 5380/5382 and Capcom P5001/P5002 keys

For Sale
XeD

XeD

Grand Master
Joined
Jul 6, 2016
Messages
1,066
Reaction score
942
Location
Vancouver BC Canada
I am selling 3d printed repro of the following keys:

Sega
5380
5382

Capcom
P5001
P5002

Price is as follow in USD:
1 key = $12
2 keys = $22
3 keys = $30
4 keys = $36

Shipping is as follow in USD:
USA = $8
France = about $15

I am currently at revision 1.2 and the keys are dark green in colour. The key is hand sanded so there are scratch makes on insertion part of the key. The keyring part with the key number has a sligh texture from the painter tape.
 

Attachments

  • 20240811_234820~2.jpg
    20240811_234820~2.jpg
    282.4 KB · Views: 212
Being 3d printed there is always a risk due to the cut out of the keys. If the key is fully insert and you don't force it, if the lock is jam/seize. You should be fine, but time will tell. From the handful that I sold I had no concern about that yet. The only one I would keep an eye on would be the P5002 as the cut out is closer to the releasing pin cutout compare to the P5001
 
Last edited:
Hello,

Could my coin box lock be one of these?
IMG_1440.jpeg


I will also PM later about ordering some 5380s if you still have some. But just wondering if I can get lucky with a key without having to drill it out 😬
 
DangerousDad said:
Hello,

Could my coin box lock be one of these?
IMG_1440.jpeg


I will also PM later about ordering some 5380s if you still have some. But just wondering if I can get lucky with a key without having to drill it out 😬
Click to expand...
That almost looks like a miwa key. Very similar to a 5380. I could be wrong tho!
 
Hey I was waiting a week for admins to approve my account so I could post here and dm you for a set of keys, I was stuck waiting for administrator approval... Yesterday after waiting for a week i bit the bullet and paid $108 on feebay for a set of 5380 from japan. I swear ten years ago when I used to post here and otaku things were being given away. Anyways I have an astro city cab i just acquired without keys and I was able to gain access thru the back for 2 out of 4 of the 5380 locks, and I just needed one key to open the control panel so I could gain access to the bolts for the crt and rotate the screen back to horizontal to get to the daughter pcb board for repairs. Thanks for making these as they are getting rarer by the day. If I knew I was going to get approved for access to dm and post today i would have held off and purchased yours. Are you using PLA or PETG/ASA?
 
You must log in or register to reply here.
Back
Top