FS FS/ FT: STILL CLEARING OUT SOME STUFF

[Dreygor]

OK so I decided to do some early spring cleaning and sell off (or trade) parts and pieces from completed (or abandoned) projects. All prices are USD. For now I only accept PayPal (friends and family or pay the difference please) and prices are without shipping included. PM me and I can get a cost estimate based on your shipping instructions.

**EDIT** Prices are negotiable and I am looking for some console and modding parts for trade (Sega Saturn - Sega Dreamcast - Nintendo GC stuff )

$80 . Complete Naomi battery back up kit. Pretty much everything you need to assemble the set-up as described here..

http://aha-forums.com/wp/2015/08/18/dump-that-battery/
and
https://forums.arcade-museum.com/showthread.php?t=302266

I decided against it as it really would not benefit me as I don't care about saving high scores. You will need something to mount it all to.

_____________________________________________________________________________________________________________________________

Make offer. Small Container lot of miscellaneous used Happ and iL Joysticks

_____________________________________________________________________________________________________________________________


$18 . $10 lot of miscellaneous un-used buttons

2x lit LED coin up buttons <--- SOLD
2x blue lit LED buttons
x1 black Happ player 1
x1 black Happ player 2


__

___________________________________________________________________________________________________________________________


**SOLD** $45 . lot of miscellaneous un-used Japanese buttons


6x Sanwa - 24mm - green
6x Sanwa - 24mm - Blue
2x Sanwa - 30mm - Translucent Yellow
2x Sanwa - 30mm - Translucent Orange
2x Seimitsu - 30mm - Translucent Orange (screw type)
2x Sanwa - 30mm - Yellow
2x Sanwa - 30mm - Red
2x Generic - 30mm - red
2x Generic - 30mm - black

_____________________________________________________________________________________________________________________________

$25 . Set of un-used Happ buttons that I was going to use for a Neo Geo cab. Microswitches are included


2x red
2x blue
2x green
2x yellow
2x white

_____________________________________________________________________________________________________________________________
$110 . Slightly used but working Blue Ultimarc Aimtrak light gun with recoil. Comes with sensor bar and recoil transformer. Do not have original box or directions. You will have to download the drivers.


https://www.ultimarc.com/light-guns/aimtrak-light-gun/aim-trak-light-gun/


Used a few times and decided I wanted to go a different route for a shooting game set-up.

_____________________________________________________________________________________________________________________________

$60 . Slightly used arcade vga card. I decided to go with with a much higher end card using the CRT Emudriver instead.

https://www.ultimarc.com/arcade-vga-and-video/arcadevga-cards/arcadevga-5000-card-pcie/

_____________________________________________________________________________________________________________________________

**SOLD!** $14 for the pair. Un-used Zippy clone joysticks with metal universal mounting bracket and high density plastic housing .Easy to change 2 / 4 / 8 ways.

_____________________________________________________________________________________________________________________________

_____________________________________________________________________________________________________________________________

One sets of Sanwa joystick plates with Dustwashers and screws. Asking $10 per set.

_____________________________________________________________________________________________________________________________

Sega Naomi Mounting Feet. $10 set

_____________________________________________________________________________________________________________________________

Brand new unused Ultimarc IPAC2 . Asking $30

_____________________________________________________________________________________________________________________________

Brand new unused Sanwa Yellow joystick ball. Asking $2.00

_____________________________________________________________________________________________________________________________

Four white Sanwa 24mm buttons. Removed unused from a control panel. $8 for all four

_____________________________________________________________________________________________________________________________

Used HDMI over Cat6 extender. Works awesome I just do not need it anymore. I do not have the IR remote receivers or remote it doe snot need them to operate. $50 for the set

_____________________________________________________________________________________________________________________________

I had bought a couple of Jermz Vewlix sub-panels before I decided to have some metal ones made. One is unused and still in the bag and the other was installed in one of my cabs and is semi populated. The semi populated one I am asking $50 for and the unused one I am asking $40 for

Unused $40

Used but semi populated $50

_____________________________________________________________________________________________________________________________

I have the sub panels i removed from my two Chewlix cabs. I am not 100% sure they will fix a Vewlix but after trading measurements with @Derick2k they seem very very close. Make me an offer if you are interested.

_____________________________________________________________________________________________________________________________

Working Die Hard Sega ST-V cart and manual. Asking $45 USD

_____________________________________________________________________________________________________________________________

Used / working Neo Geo Uni-Bios v3.2 . It had a broken leg that was repaired and I used it for a while until I upgraded to 4.0. I know he does not sell these anymore. So PM me with an offer.

_____________________________________________________________________________________________________________________________

------GONE------ **FREE** PICK-UP ONLY !!! A bunch of plastic an metal parts from a Korean Crowin 302 cab. You come for one part .. you leave with it all. That's the deal. I am going to give it a few weeks then it will probable go to the dump. The MDF was in bad shape and I was going to rebuild it , but I decided against it.

**NOTE** No upper control panel, No tube, No chassis .. the tube and chassis are available but not for free. I will list those later.

_____________________________________________________________________________________________________________________________

------SOLD------ $140 + Actual Shipping - A COMPLETE Orion 2903 Dual Res Chassis from a Korean Crowin 302 Cab (from the same cab parted out above).


I sent this off to Sharp Image in Las Vegas, Nevada ( http://sharpimagerepair.com/ ) It came back and has sat since. So although it has been repaired and tested by them I never hooked it up or tested it, so I am selling it as un-tested by me. Below is the breakdown of my PayPal transactions from where I paid for them to repair it...


Seller info: Sharp Image Repair
Date: Mar 1, 2019

Purchase details
ORION 2903 DS**
COMPLETE MONITOR CHASSIS BOARD-REPAIR & CLEANING** NEW CAP KIT REPAIR**
$145.00

Shipping
$39.00

Total
$184.00


.. As you can see it cost $145 to repair it so I am not even asking for that much. Also You can see what it cost when they shipped it back to me from Nevada so don't be surprised at the shipping cost.

... There's probably more coming but this is all I got to for now.

 

[Dreygor]

**RESERVED**

There's allot more coming I am just old and slow (or at least I feel that way).

 

[PlayYing]

I'll take the Sanwa buttons friendo.

 

[Dreygor]

Aight

 

[Dreygor]

Sold the Zippy clone joysticks

 

[Dreygor]

Bump with all kinds of updates

 

[PlayYing]

Want

Four white Sanwa 24mm buttons

Used but semi populated

A set of Sega Naomi PCB feet with mounting screws.

one set of sets of Sanwa joystick plates with Dustwashers and screws.

A couple set of Sanwa buttons and joystick balls that I removed from a panel before they were even used. Each set has eight Sanwa 30mm and one matching joystick ball. both please

 

[opt2not]

PM Sent on Naomi PCB feet with mounting screws

 

[ebzero89]

Did anyone already pick up the HDMI extenders?

 

[Dreygor]

Did anyone already pick up the HDMI extenders?

They are still available. I will update everything tonight, currently I am at work on my phone which sucks for editing posts.

 

[AMS]

Pm on the gun set

 

[bagheera369]

pm on the sub panel covers

 

[Dreygor]

Updated first post, and I think I replied to everyone's PM. If I missed someone please hit me up again.

I am still rummaging through boxes so who knows what else I will post.

 

[Crimson Kino]

Definitely keeping my eye on this, great stuff so far

 

[Dreygor]

Ok I think I answered everyone back. Just waiting for a few people to complete their transactions.

 

[Dreygor]

Bump / updated. Sold some stuff, shipped some stuff, added some stuff.

I am going to rumage through some boxes this weekend and see what else I come up with.

 

[PlayYing]

Someone take this man's yellow ball!

 

[Dreygor]

Nothing to add just yet.

If you are local to the Savannah, GA area I have some working 25" CRT monitors to sell. very light burn. One of them has a completely rebuilt WG chassis. PM for details. Will not ship.

 

[Dreygor]

Just bumping it up.

I will probably add some stuff this weekend.

 

[Dreygor]

Every once in a while I remember I have this thread and decide to bump it up.

This time it was the discussion about the Naomi battery back up that reminded me to bump it this time. Not only does it help for saving high scores but it saves the last game in memory so you can instaboot to the last game you were playing

If your looking to trade I am looking for a Sega Master System (1 or 2), Coleco ColecoVision, Mattel Intellivision, Dreamcast VMU units, and a few odds n ends console things like memory cards and controllers and stuff for various systems. Just give me a PM with what you have in mind.

I am also on the fence about listing a collection of working and in very good condition with manuals Namco System 11/12 fighting game PCB collection (sorry no fighting layer or Retsuden 3). Just need to get off my butt and take pictures of the boards and screens of them working. These will come in handy for when the multi comes out .. but with this collection you probably wouldn't need a multi.