Gerber files: Coin cell battery holder for MV1B and MV1C

[kissedin]

Simple board that some of you may like. It is to be used with a 19 mm coin cell battery holder and a 2032 battery on a board with disabled charge circuit. (Original battery is a Toshiba VG2430 rechargeable 3V lithium battery).

Note: I've used the horizontal version in my projects. But here is an updated (smaller pcb) one. Vertical is completely untested (use angled pins). As always when you get something for free; I don't take any responsibility what so ever. These boards may kill you. Or destroy your MVS-board. They may also work on MV1C-boards. Please report back if you try.

Horizontal mount


Vertical mount


Vertical: https://drive.google.com/file/d/13TorYsmV3x3Nhh5ThmvKzKMYEsGKzMP7/view?usp=drive_link
Horizontal: https://drive.google.com/file/d/1K9uPLaEdffWC1upbcKreXmPq3zb6qEt0/view?usp=drive_link

 

[chacal231077]

Simple board that some of you may like. It is to be used with a 19 mm coin cell battery holder and a 2032 battery on a board with disabled charge circuit. (Original battery is a Toshiba VG2430 rechargeable 3V lithium battery).

Note: I've used the horizontal version in my projects. But here is an updated (smaller pcb) one. Vertical is completely untested (use angled pins). As always when you get something for free; I don't take any responsibility what so ever. These boards may kill you. Or destroy your MVS-board. They may also work on MV1C-boards. Please report back if you try.

Horizontal mount


Vertical mount


Vertical: https://drive.google.com/file/d/13TorYsmV3x3Nhh5ThmvKzKMYEsGKzMP7/view?usp=drive_link
Horizontal: https://drive.google.com/file/d/1K9uPLaEdffWC1upbcKreXmPq3zb6qEt0/view?usp=drive_link

Thank you Shidoshi

 

[kissedin]

Finally got a MV1C and can confirm that the vertical mount version works. Used battery holder with 20 mm leg space for this one.

 

[Neo-Alec]

Nice! That's one dirty MV1C! You can buy a replacement plastic cover on ebay.