Good source (USA) for MVS cart shells that are the correct size?

[Kujako]

I have a few games that could use a reshell, but most of the after market ones I've come across are either too expensive to import or are ever so slightly too large. Anyone have a good supplier State side?

Thanks,

 

[kikaso]

I don’t have experience using these but I have heard good things.

 

[Kujako]

I don’t have experience using these but I have heard good things.

Price is right, may have to give one a try. Thanks.

 

[kingau]

I bought from them before, the quality is the same as the original shells just different screws.

 

[LittleLarrySellers]

Plus one. Also picked up a few of those shells. Really nice quality.

 

[Kujako]

I don’t have experience using these but I have heard good things.

So... got one, and the fit is not great. Had to shave down the posts for the boards to keep them from flexing. The front posts were taller than the rear ones for the bottom board. Once I did that it was an improvement over the case I had, but it's still a concern.

 

[kikaso]

Sorry to hear the cases didn’t meet expectations

 

[Kujako]

Sorry to hear the cases didn’t meet expectations

Well once I filed it down a bit after measuring with a caliper against an original it's pretty good. But had I not gotten a transparent one I might have missed the problem.

 

[Neo-Alec]

If you have original shells in poor condition, I may want them.

 

[hatmoose]

I 3D printed some based on the ones on thingiverse. 30+ hours of print time, would not recommend…