- Thread starter pacman70
- Start date
Battlesmurf
Grand Master
Interesting. One of mine does that too. How does Recalhorn look with it?
JohnRambo'sKnife
Champion
I believe so. Recalhorn definitely shows the same box in the top corner.
There is also a pixel missing from the top corner of Darius.
Battlesmurf
Grand Master
Did you fellas by chance find a fix for this?
JohnRambo'sKnife
Champion
I am curious as well. Does anyone else get the offset upper pixels in the top right, bottom right corner of the screen with Darius?
Tested this on my F3 Multi and got the same strange blob, however mine was on the first stage.
Pulled out my spare F3 motherboard and tested with that, same result.
Then I reached out to @BuddyC and asked if he had the same issue. He said that all was fine on his setup.
He kindly sent over his ROMset and I tested with that and got exactly the same result as earlier.
Then he suggested that I check the voltage on the JAMMA edge. Mine was around 4.9 so I boosted it to 5.1 and to my surprise the blob went away
Pulled out my spare F3 motherboard and tested with that, same result.
Then I reached out to @BuddyC and asked if he had the same issue. He said that all was fine on his setup.
He kindly sent over his ROMset and I tested with that and got exactly the same result as earlier.
Then he suggested that I check the voltage on the JAMMA edge. Mine was around 4.9 so I boosted it to 5.1 and to my surprise the blob went away
Thank you for that piece of information.
A bit of searching shows that Grid Seeker was released on HW similar to RayForce.
