ChuckCasey
Beginner
I have 4 Groove Coasters. Three Link Fever 3s and one 4.
Two of the Link Fever 3 machines are experiencing FAST IO errors. Error 502 (Fast IO Universal PCB recognition - check the connection from Fast IO Hub to Fast IO Universal PCB)
I've tried tested and proven network cables from Hub to Universal with no resolution. I've tried every output on the HUB too. I've also changed the network cable from TypeX main PC to the HUB.
I've tried each in other machines. The issue follows the PCBs.
Checked both the 5vdc and 12vdc to the HUB and Universal PCB (both good)
Do I need a special network cable?
Any tips or tricks on solving this Fast IO error?
Thanks !!
Two of the Link Fever 3 machines are experiencing FAST IO errors. Error 502 (Fast IO Universal PCB recognition - check the connection from Fast IO Hub to Fast IO Universal PCB)
I've tried tested and proven network cables from Hub to Universal with no resolution. I've tried every output on the HUB too. I've also changed the network cable from TypeX main PC to the HUB.
I've tried each in other machines. The issue follows the PCBs.
Checked both the 5vdc and 12vdc to the HUB and Universal PCB (both good)
Do I need a special network cable?
Any tips or tricks on solving this Fast IO error?
Thanks !!