Help identifying this baseball control panel

bradyscribbles

Beginner
Joined
May 26, 2017
Messages
11
Reaction score
2
I picked up this Dynamite Baseball control panel a while back on yahoo japan. I grabbed a naomi cart and tried it all out the other day in my Naomi universal cabinet. Neither the joystick or bat controller registered. Turns out naomi dynamite baseball expects a 2 player setup with analog joysticks. So what is this control panel for?
IMG_9455.jpeg
IMG_9456.jpeg
 
Have you tried going into the test menu and changing the system assignments?
From the manual:
1794956131046.png


Also, grab the manual and verify your wiring is correct.

Dynamite Baseball and World Series baseball are the same, so you can check either manual.
 
You need a little harness for the baseball bat to work. I have similiar panel and it works on my Naomi like this.
 

Attachments

  • IMG_3410.jpeg
    IMG_3410.jpeg
    284.4 KB · Views: 5
  • IMG_3409.jpeg
    IMG_3409.jpeg
    542.9 KB · Views: 6
  • IMG_3408.jpeg
    IMG_3408.jpeg
    371 KB · Views: 6
You need a little harness for the baseball bat to work. I have similiar panel and it works on my Naomi like this.

P.s Don’t worry about the short little harness in the pic that shows the whole harness and io board. That is just an input reverse so I can also play monkey ball on the basball panel analogue joystick with the orientations correct.
 
Thanks for your replies. I'm mostly concerned about the fact that my control panel doesn't have an analog joystick. The wire harness doesn't look to be hacked at all. Do you think it was just switched out at some point, or can you play the game without an analog stick?
 
Back
Top