Help on CPS-III to Sega Blast City Wiring

[SwagDoll]

Recently I bought a Sega Blast City arcade cabinet to connect to my CPS-III motherboard. However, I don't have the correct kick harness, and don't know how to properly connect the audio for it. Which wires do I need to have everything set up properly, and where do I put them?

 

[Zepherino]

Assuming your cab is stock and doesn't have a hacked up JAMMA harness, you can build or buy both the stereo cable and kick harness cable since they are detachable.

If you just plug the JAMMA harness, you should get mono audio if you don't have a stereo cable.

https://www.ebay.com/itm/283456566839 example of a kick harness
https://www.ebay.com/itm/178180598192 example of stereo cable. I think specific listing is far too expensive for what it is, but you get the idea.

 

[SwagDoll]

Okay, thank you for letting me know, I'll check them out.

 

[nem]

https://www.ebay.com/itm/178180598192 example of stereo cable. I think specific listing is far too expensive for what it is, but you get the idea.

This only works if you have the extended 001 harness with JVS power connectors.

 

[Zepherino]

Good to know. I wasn’t aware there are different variations of the harness