Hitachi GMK-29fs2

[Gonzo]

Sorry for the moon question, but I came by a Hitachi board and was wondering where does the Red,blue,green,yellow wires goes.Here's a pic just in case.

 

[nem]

For video input?

It's the 5-pin connector in the lower left corner in your pic.



There's five wires: red, green, blue, sync & ground

 

[Gonzo]

Oh I forgot about those Thx for the reply. But i will connect those plus post another pic of the wires.

 

[Gonzo]

For video input?

It's the 5-pin connector in the lower left corner in your pic.



There's five wires: red, green, blue, sync & ground

For video input?

It's the 5-pin connector in the lower left corner in your pic.



There's five wires: red, green, blue, sync & ground

Mines doesn't connect there. That looks like for the control board. Already found it but I don't know if I connected it right. When i turned on nothing but white screen.

 

[Gonzo]

Dude I correctly installed all wires. Now it's up and running with a new cap kit. I left this project sitting in the garage for about a year and i forgot to put everything back lol. Thanks for the help.

 

[SBDESIGN]

where did it plug in?
do you have a picture?

 

[nem]

D'oh, I only now understood OP meant the connectors for the deflection yoke.

Are you asking for those, @SBDESIGN?

 

[nem]

 

[JohnRambo'sKnife]

For video input?

It's the 5-pin connector in the lower left corner in your pic.



There's five wires: red, green, blue, sync & ground

Hi @nem,

Can you confirm the wiring order (from left to right if facing connector from outside of board)?
1. R
2. G
3. B
4. Sync (White)
5. Ground (Black)

 

[nem]

That's correct.

 

[JohnRambo'sKnife]

Thanks for confirming, as the Capcom Impress manual made me believe otherwise:

 

[nem]

Well, I started doubting myself, and sure enough, Impress manual is right and I was wrong. Oops.

 

[JohnRambo'sKnife]

Guess I am glad I didn't turn it on. What a counter intuitive pinout.

Thanks for the photo.