GhaleonUnlimited
Professional
So my MKII ROM board won't stay on the main board, slips off when I move the machines for an event (I have the board mounted inside the machine, but I move the cabs on their back and it slips off).
Also, my Mach Breakers ROM board is having a hard time making a 100% connection w the mobo, usually resulting in garbled graphics . If I reseat it perfectly , it's fine.
What are safe ways to secure/sandwich 2 boards together that are having this problem?
For my Breakers , one of the boards looks slightly bent . Should I reflow the pins on both sides of the connectors ? What else to do?
Pics 1 and 2 are the MKII. Pins are a little bent from the rom board falling off a few times.
In Pic 4, I took a blurry Pic but the boards are not making a 100% tight, squishy connection after I put them together, they separate a bit.
Also, my Mach Breakers ROM board is having a hard time making a 100% connection w the mobo, usually resulting in garbled graphics . If I reseat it perfectly , it's fine.
What are safe ways to secure/sandwich 2 boards together that are having this problem?
For my Breakers , one of the boards looks slightly bent . Should I reflow the pins on both sides of the connectors ? What else to do?
Pics 1 and 2 are the MKII. Pins are a little bent from the rom board falling off a few times.
In Pic 4, I took a blurry Pic but the boards are not making a 100% tight, squishy connection after I put them together, they separate a bit.
