Burrs
Beginner
Name's Bear, and I recently picked up a Sega Net City arcade cab. My first console was a Colecovision back in '83, and I've been an avid gamer since I could talk.
Current Net City Project status:
* Net City's MS-2933 and PSU is going to be getting a recap/reflow in the next week or two by Keeb's Arcade out of Texas.
* Replaced the factory PSU fan with worn bearings with a Noctua (Going to be living in a home at 73F)
* I'm running a hybrid between a CPS2 and a MiSTercade with RiddleTV JAMMA and Multifighter Kick harness splitter. Audio is via 1/8"->RCA on the MiSTer FPGA and RCA on the CPS2, going to an audio switch that changes based on which input is powered
* Today, replaced the OEM speakers with Morel Ultra Integra MKII 4" coaxial speakers - Zero magnetic interference!
* Installed a Fosi BT30D amp with USB fan - Created pigtails to adapt the internal speakers to standard speaker cables with banana connectors (A100482CT-ND and 176282-1-ND on Digikey)
* Got the rear access panel covered with sound deadener
* Picked up a PartsExpress MKSX4 low profile passive subwoofer that the 160w sub channel on the Fosi is driving, along with 1.5" sorbothane rubber bumper feet. The sub is going to rest on the rear access panel when not used, which is why the rear panel has sound deadener on it
Need to do a bit of cable management inside the cab and do a calibration on it once it's been recapped. It's sounding very, very good, and will be a bit better once I REW it as best I can with the limited adjustments on the FOSI.
This site's been a wealth of information for me - Even though I'm a noob here, I've been around gaming and projects for a while. Figured I'd share my experience and my current setup!
Current Net City Project status:
* Net City's MS-2933 and PSU is going to be getting a recap/reflow in the next week or two by Keeb's Arcade out of Texas.
* Replaced the factory PSU fan with worn bearings with a Noctua (Going to be living in a home at 73F)
* I'm running a hybrid between a CPS2 and a MiSTercade with RiddleTV JAMMA and Multifighter Kick harness splitter. Audio is via 1/8"->RCA on the MiSTer FPGA and RCA on the CPS2, going to an audio switch that changes based on which input is powered
* Today, replaced the OEM speakers with Morel Ultra Integra MKII 4" coaxial speakers - Zero magnetic interference!
* Installed a Fosi BT30D amp with USB fan - Created pigtails to adapt the internal speakers to standard speaker cables with banana connectors (A100482CT-ND and 176282-1-ND on Digikey)
* Got the rear access panel covered with sound deadener
* Picked up a PartsExpress MKSX4 low profile passive subwoofer that the 160w sub channel on the Fosi is driving, along with 1.5" sorbothane rubber bumper feet. The sub is going to rest on the rear access panel when not used, which is why the rear panel has sound deadener on it
Need to do a bit of cable management inside the cab and do a calibration on it once it's been recapped. It's sounding very, very good, and will be a bit better once I REW it as best I can with the limited adjustments on the FOSI.
This site's been a wealth of information for me - Even though I'm a noob here, I've been around gaming and projects for a while. Figured I'd share my experience and my current setup!
Last edited:
