Hi,
I’ve been searching online for past cases to explain the problem I may be having with my NNC tri-sync monitor.
I believe there is an issue with the chassis when the vga signal is passed in and it shuts down.
Monitor comes on fine and only shut down once the vga signal is passed through. I’ve tried both the 15khz and 31khz setting on my Naomi and it produces the same results. The neck glow and chassis itself look fine, but open to starters before I pull the chassis out and take a closer look. I suspect the issue is with a bad out of spec resolution being fed to the chassis.
Video of the issue:
View: https://youtube.com/shorts/Wdm0z-rg5-4?si=aUebRzwNhWOUj3Ns
Thanks!
I’ve been searching online for past cases to explain the problem I may be having with my NNC tri-sync monitor.
I believe there is an issue with the chassis when the vga signal is passed in and it shuts down.
Monitor comes on fine and only shut down once the vga signal is passed through. I’ve tried both the 15khz and 31khz setting on my Naomi and it produces the same results. The neck glow and chassis itself look fine, but open to starters before I pull the chassis out and take a closer look. I suspect the issue is with a bad out of spec resolution being fed to the chassis.
Video of the issue:
Thanks!