Jamma Pass-through

[SelfDeniedHoarderz]

Re DB15, It's certainly possible but I'm not sure why it would be needed? If the pass-through were being utilised in a cab the cabs controls would be utilised, and if it were used in conjunction with a supergun surely the supergun would provide its own controller inputs.

I've thought it would be neat to have a way to connect to PS4 controller or any wireless controller.

 

[neokoen]

Re CPS looms, I can do it but it's rather time consuming. I could compromise and bundle in a CPS1 and/or a CPS2 connector and pins for people to crimp themselves with their own wiring.

I don't mind crimping so for me that would be a good solution if it comes with the connectors and pins.
What is the connector type on the pass-through board?

 

[Frank_fjs]

JST XH

 

[Blackfish]

Hey I was thinking have you considered making Jamma cabinet linking sets?

I think their could be a few people interested in these if they were made well. I was thinking of making one but as I'm a noob at this kind of thing it would be awhile before I could do it myself. The idea is to use a modified jamma pass-through at one end that includes a connector for the Video and one for the player 2 controls. At the other end would be a similar board without the jamma connector. The idea would be to use standard connectors like VGA for the video and a 12 pin din plug or something for the controls. Would be nice to use some standard cable that has the correct number of cores but I can't think of one of the top of my head. I guess you could just use a header or something and people could crimp a cable together.
Just an idea as I have seen ant quality Jamma link setups for sale and its seems relatively simple in construction, specially if generic cables can be used.

 

[nem]

I have one of these:

https://www.tops-game.jp/products/detail.php?product_id=2620

Can recommend.

 

[Frank_fjs]

Probably not something I'll take on as have too much going on at the moment.

 

[Sp33dFr34k]

What's the status of this @Frank_fjs?

 

[Frank_fjs]

I've got the boards but have had zero time to assemble.

 

[The Spaniard]

What is the intended purpose of using a Jamma pass through?

 

[Sp33dFr34k]

No worries Frank, for me personally no rush so take your time. Was just wondering

 

[solderchicken]

Nothing exciting. A Jamma pass-through board that I developed.

Voltmeter, 5V / 12V switchable.

Service / Test / Coin buttons.

Built in negative 5V generation, can be disabled via a jumper.

Jumpers to enable / disable buttons 4,5,6 from the Jamma edge.

Kick harness connector.

That's pretty much it. Simple and effective.

These look amazing! Can I get them in the UK? TBH a parts kit would suit me best so I can assemble myself. Thank you in advance.

 

[kikaso]

These look amazing! Can I get them in the UK? TBH a parts kit would suit me best so I can assemble myself. Thank you in advance.

Frank hasn’t been active on this forum in a couple of years