What's new
By:

Jamma to Ultracade UVC adapters service needed

SNK-NEO-GEO

SNK-NEO-GEO

Enlightened
Joined
Jul 21, 2015
Messages
3,631
Reaction score
2,667
Location
Virginia
Hello,
I am looking for a service..I need two of the adapters on the picture. if you have the skills set to make me two of those please PM me. I would like to use the Taito Type X2 system in my Egreet II cab using the Ultracade UVC.

shmups.system11.org/viewtopic.php?f=6&t=33659

Thank You!
 

Attachments

  • image.jpg
    image.jpg
    25.6 KB · Views: 258
Last edited:
I made a few of these, I let my last one go with the UVC itself.
Its super easy, just tap the 12v, 5v, ground to power the device, then punch into video pins R,G,B,S,video ground.
jamma-pinout.gif


The hardest part is getting that connector for video from the UVC, I ended up cutting the motherboard connector off a old PC AT PSU.
 
Just wanted to say it seems pretty straightforward, just that specific type of connector might be hard to source. I wouldn't mind helping you out, but I'm sure somebody closer to you can lend you a hand :)
 
Jassin- I have two UVC but if you could sell me just the cable adapter or provide a service to build me two cables adapter that would be cool:)
 
Let me see what I've got at home for parts, I know I've got a spare JAMMA pcb/key and the 4-pin molex.
The Microcenter near me has a bin of old AT PSU's, so I maybe able to get that connector as well.

This would still only get you one, but you could copy it easily.
Everything is really huge and easy to solder, in fact its a good project to learn to solder on (because if you mess up all you need to do is replace the JAMMA pcb/key and start over).
 
Just to throw in a plug - I am still looking for a UVC and can't seem to find any anywhere after I missed the last Ebay sell of them. If anyone does have an extra they are willing to part with, please let me know. Probably not the case and not to distract from this posting, but since the UVC was being thrown out thought I would try and see.
 
arcadeWC said:
Just to throw in a plug - I am still looking for a UVC and can't seem to find any anywhere after I missed the last Ebay sell of them. If anyone does have an extra they are willing to part with, please let me know. Probably not the case and not to distract from this posting, but since the UVC was being thrown out thought I would try and see.
Click to expand...
Jassin just said he had one for sale with the cable.. Grab it man:)
 
When I first got my UVC it seemed no one really valued them, I paid 50$ shipped.
When I sold my UVC totally different story, now I've seen 150$+ shipped.
 
SNK-NEO-GEO said:
Jassin just said he had one for sale with the cable.. Grab it man:)
Click to expand...
No no when I SOLD the one I had, it was with the cable I had made.
About two years ago now, to Shadow55 (I think that was his username) on Neo-Geo.com.
 
jassin000 said:
Let me see what I've got at home for parts, I know I've got a spare JAMMA pcb/key and the 4-pin molex.
The Microcenter near me has a bin of old AT PSU's, so I maybe able to get that connector as well.

This would still only get you one, but you could copy it easily.
Everything is really huge and easy to solder, in fact its a good project to learn to solder on (because if you mess up all you need to do is replace the JAMMA pcb/key and start over).
Click to expand...
great thank you! Please pm me the total once you have it:)
 
You must log in or register to reply here.
Back
Top