What's new
By:

FS JST brand JAMMA connectors/pins - Parts/Datasheet

For Sale
RealMFnG said:
Here is TE Connectivity's version (I think):
  • Edge Connector Part No. 583859-1
  • Crimp Pins Part No. 5-583616-2
The card thickness range on this seems to be pretty good at 0.055" ~ 0.070" (1.40mm ~ 1.78mm). Friendly to JAMMA boards I would think? This is in comparison to Sullens and EDAC's edge connectors (non-crimp pins) which is at 0.062" (1.57mm). Both are known to be quite snug. I don't know what JST's, Hirose's, or Molex's card thickness tolerance is.

Lots of stock is shown on all over the place. Is this info known? I just stumbled upon it as I was browsing around.
Click to expand...
Thanks for the part numbers. I’ve ordered some from Mouser - coming from Hong Kong. Pricey pins but I will stash a couple and have a crack at doing one new Jamma connector for my Exceleena. I hope the crimping tools I have will suffice.
 
Ziggy Cheetos Dust said:
Thanks for the part numbers. I’ve ordered some from Mouser - coming from Hong Kong. Pricey pins but I will stash a couple and have a crack at doing one new Jamma connector for my Exceleena. I hope the crimping tools I have will suffice.
Click to expand...
Make a post with pics in the Projects Showcase sub when you get the parts.
 
If anyone’s here in 2025, the pins referenced above are 28-24 AWG - too small to easily work with most existing JAMMA wire gauges. I got away with crimping 22 AWG wires but anything bigger was tricky.
IMG_4115.jpeg
IMG_4116.jpeg
IMG_4117.jpeg
 
Last edited:
@Ziggy Cheetos Dust I found a few of the larger gauge OEM JST crimped leads, see thread :
SnakeGrunger

FS Thread 'New Items : OEM Egret Jamma connectors, Seibu HB-45A, MS-2930 Remote, Jamma to VGA'

As the title says, a few new items for sale on my website :

Brand new OEM JST Jamma connectors and 50x crimping leads, includes replica jamma key and replica Taito stickers. Used in Egret 2/3, Madonna, some SNK cabs as well as the Windy1.
https://pxlmod.com/products/jst-jamma-connector-complete-harness-kit

Seibu HB-45A Audio hybrid module, built with quality components for reduced noise,
https://pxlmod.com/products/seibu-hb-45a-audio-hybrid-module

MS-2930 Remote, 1:1 copy of the original...
  • Like
  • Love
 
Ziggy Cheetos Dust said:
If anyone’s here in 2025, the pins referenced above are 28-24 AWG - too small to easily work with most existing JAMMA wire gauges. I got away with crimping 22 AWG wires but anything bigger was tricky.
IMG_4115.jpeg
IMG_4116.jpeg
IMG_4117.jpeg
Click to expand...
Keen to hear what the grip’s like once you have it populated… good stuff.
 
SnakeGrunger said:
@Ziggy Cheetos Dust I found a few of the larger gauge OEM JST crimped leads, see thread :
SnakeGrunger

FS Thread 'New Items : OEM Egret Jamma connectors, Seibu HB-45A, MS-2930 Remote, Jamma to VGA'

As the title says, a few new items for sale on my website :

Brand new OEM JST Jamma connectors and 50x crimping leads, includes replica jamma key and replica Taito stickers. Used in Egret 2/3, Madonna, some SNK cabs as well as the Windy1.
https://pxlmod.com/products/jst-jamma-connector-complete-harness-kit

Seibu HB-45A Audio hybrid module, built with quality components for reduced noise,
https://pxlmod.com/products/seibu-hb-45a-audio-hybrid-module

MS-2930 Remote, 1:1 copy of the original...
  • Like
  • Love
Click to expand...
Thanks @SnakeGrunger. I’d be interested to know the part number of those pins because they look different to the ones I got. I’m posting across a couple of threads on this but i think one is a TE and one is a JST 😬
 
Would've loved to get one of these a few years back before I chopped it off my Madonna and soldered a Hirose on it instead. Ah, well. I was more interested in having something functional and fully wired so everything "just worked" versus keeping everything 100% original, and nobody seemed to have a source for the pins, let alone the connector itself.

Does anyone know if the Exceleena II use this connector as well?
 
You must log in or register to reply here.
Back
Top