What's new

mshepherd27

Beginner
Joined
Aug 24, 2016
Messages
3
Reaction score
1
When I test jumpers that I clear the solder off of with my multimeter, I still am getting signal/beeps that indicate there's a connection between the two points but visibly there is no connection I've removed all solder. This is happening on almost all points that solder removal is necessary for the mod. can anyone point me into a direction of why this would be happening? Thank you. This board is a dark stalker's one USA board
 

gromice

Beginner
Joined
Mar 6, 2018
Messages
23
Reaction score
13
Location
Bay area
It’s not just solder to jump them, a lot of those have a tiny little connection that needs to be cut to be fully disconnected
 

Attachments

  • 504BEA0A-6D00-4368-A529-90B9DC3D3626.jpeg
    504BEA0A-6D00-4368-A529-90B9DC3D3626.jpeg
    69.3 KB · Views: 14

ekorz

Multi Boyz 4 Pi
Legendary
Multi Boyz
Joined
Aug 21, 2016
Messages
3,747
Reaction score
3,987
Location
Boston, MA
If you are installing a darksoft multi, don’t touch the jumpers
 
Top