Bump.
Does anyone know what the Taito I/O card actually does?
Looks to me that it is just an off the shelf part and not something specific to the JVS standard..
The part number is G4S306-IO, which is referenced in the user manual for the DFI G4S306-C motherboard which looks to be the model used for the Taito Type X...
Is this the same I/O as used with the TTX2?
There are several references to a 'card-edge connector (optional)' in the manual that include 'Game port', 'S/PDIF' & 'Serial' connections.
I assume the 10 pin connector opposite the USB port is the serial connection.
I can't tell from looking at the PCB what conversion is occurring, but as this is just off the shelf... is it simply a serial to USB conversion?
Com2 --> USB --> JVS I/O
(Yes, i am aware that the JVS 'USB' port isn't following USB protocol, but perhaps it is just a relay to the serial interface...?)
I am interested in native JVS support on a non native TTX2 setup
Perhaps a suitable substitute for the Taito I/O card could be found that would manage this task?
Could someone with an actual TTX2 check their I/O card to see:
1. If it is the same as the card above,
2. What the two chips on the USB side of the card are?
Cheers!