WTB JVS Kick Button Harness for Sega Naomi Universal cabinet

[StormyNormy]

Now that I got a 2L12B CP I should eventually connect those extra 6B, right?
Hope you guys can help me out with this.

(Original), (used), within Europe and working.

NOTE: (New) Astro City seems to have different pin layout and are not compatible (?)

Edit: Photo for reference

 

[CPSmaster]

Now that I got a 2L12B CP I should eventually connect those extra 6B, right?
Hope you guys can help me out with this.

(Original), (used), within Europe and working.

NOTE: (New) Astro City seems to have different pin layout and are not compatible (?)

Sending you a PM

 

[Mrhide]

Which jvs card are you using?

 

[StormyNormy]

Which jvs card are you using?

Does it make a difference?

 

[Mrhide]

Does it make a difference?

Very much Yes

2 different examples but there are a lot more

 

[JohnRambo'sKnife]

The real question is what cabinet you are using this in.

 

[twistedsymphony]

Does it make a difference?

there are 4 or 5 completely different harness types based on the JVS IO that I can think of, and that's just based on the common ones used.

but depending on your cab that changes the other end of it too.

 

[StormyNormy]

The real question is what cabinet you are using this in.

Thanks for pointing that out - title amended.

 

[twistedsymphony]

Thanks for pointing that out - title amended.

Based on this being a NAOMI Universal the harness between the IO and the control panel connectors is already built into the cab.

Most factory 6-button panels would have come with the harness for the buttons to the control panel connectors already integrated. On these JVS cabs there is no "kick harness" it's all part of the main harness.

Assuming your panel is custom or didn't include that you'd need to build that part custom or buy a custom one from someone that makes them like @Lemony Vengeance