Hey all,
I've got two cabs here that came with the chassis, but neither was installed.
Both are versions of the K7000, only difference is one has a few caps on
the underside ave a little extra bit with some caps on it near the fly
back.
It looks like bough have had their flybacks replaced.
However I look at the cabs and one has a zenith tube which I know has the k7000a with it normally.
How can I tell which one goes to the zenith tube and should I be concerned about the replaced flyback?
I know the flybacks aren't compatible between the 7000a and the normal one, but can I use a regular k7000 chassis on the zenith?
I've got two cabs here that came with the chassis, but neither was installed.
Both are versions of the K7000, only difference is one has a few caps on
the underside ave a little extra bit with some caps on it near the fly
back.
It looks like bough have had their flybacks replaced.
However I look at the cabs and one has a zenith tube which I know has the k7000a with it normally.
How can I tell which one goes to the zenith tube and should I be concerned about the replaced flyback?
I know the flybacks aren't compatible between the 7000a and the normal one, but can I use a regular k7000 chassis on the zenith?