Konami Monitor Pinout

[stylecity]

ok guys, need a little help again. New konami monitor, looking for pinout. I have a VGA conversion pinout map, but I need ac outs (top 3 pins) I believe it's neutral, ground, line. Want to make sure I wire up a power cord correctly. And rgb, sync, and ground, pins as I may use it in a JAMMA cabinet.

Cheers friends.

Eric

 

[Mitsurugi-w]

Hmm. I've never seen a connector like that.

 

[stylecity]

Hmm. I've never seen a connector like that.

heres what I have. Just not sure what pin is line and neutral, or if that even matters.

 

[Derick2k]

heres what I have. Just not sure what pin is line and neutral, or if that even matters.

You should not worry about it, follow the 2 wires, if one gets to a fuse then tie that wire to line. But since the crt is meant to be used in a cab, its not going to be polarized, so just plug it in.

 

[stylecity]

heres what I have. Just not sure what pin is line and neutral, or if that even matters.

You should not worry about it, follow the 2 wires, if one gets to a fuse then tie that wire to line. But since the crt is meant to be used in a cab, its not going to be polarized, so just plug it in.

Awesome, thanks for the help. I have a 3 prong emi socket I'm going to install. I feel much better about this now.

 

[Derick2k]

Go for it man, you should remove that funky connector and replace it with something more common/standard and separate the ac connection from the rgb lines.

 

[stylecity]

Go for it man, you should remove that funky connector and replace it with something more common/standard and separate the ac connection from the rgb lines.

That is exactly what I'm planing to do. Can't decide if I'll wire it up VGA or RGB yet tho.

 

[rewrite]

Konami made monitors? What did they use them in? All of their music arcade games use Toshiba's.

Color me intrigued.

 

[stylecity]

Konami made monitors? What did they use them in? All of their music arcade games use Toshiba's.

Color me intrigued.

I believe the monitor was manufactured by Samsung for konami.

 

[rewrite]

Konami made monitors? What did they use them in? All of their music arcade games use Toshiba's.

Color me intrigued.

I believe the monitor was manufactured by Samsung for konami.

What did this come out of? Or do you have a model number for the chassis by chance?

While the Tube is probably Samsung, I don't think I've ever heard of Samsung making monitor chassis for arcade games.

 

[stylecity]

@rewrite,
This is all I have on me now. Monitor came from Russia.

 

[rewrite]

@rewrite,
This is all I have on me now. Monitor came from Russia.

Neat! If at some point you get a good shot of the chassis, I'd be interested to see what it is. I'm just curious .

 

[stylecity]

@rewrite
Here ya go. Hope this helps.

 

[zero238]

pics of the circuit board if you can. That's where the magic is.

 

[stylecity]

pics of the circuit board if you can. That's where the magic is.

I'll get you those pics @zero238

 

[stylecity]

@zero238 @rewrite
Hope this is what you were wanting to see.

 

[rewrite]

@zero238 @rewrite
Hope this is what you were wanting to see.

That's a Kortek chassis.

MP-KT1982 would be my guess (the end of the chassis model number is obscured by a wire) since the serial number sticker on the frame says 19F. Lots of info on it out there, you should be able to fix anything that goes wrong with it.

 

[stylecity]

thanks @rewrite
I've recently been obsessed with crt monitors so I plan to learn as much as possible about them.