Got a monitor that is called Kortek - copy of Nanao ms7-20L.a picture is available here:
https://www.jomac.net.au/wp-content/uploads/2006/02/Kortek_Copy-of-Nanao-MS720L1.jpg
Is there someone who knows what value B+ should be and where to.measure it?
Or at least know what values b+ is on a nanao ms7-20L?
I've tried to do some research but information is scarce. It seems that these two almost identical chassis use different flybacks. Therefore the recommended b+ might differ.
Nanao use 5F13060A1 MSH1FPU07
Kortek use kfs60291
(source teknoservice)
https://www.jomac.net.au/wp-content/uploads/2006/02/Kortek_Copy-of-Nanao-MS720L1.jpg
Is there someone who knows what value B+ should be and where to.measure it?
Or at least know what values b+ is on a nanao ms7-20L?
I've tried to do some research but information is scarce. It seems that these two almost identical chassis use different flybacks. Therefore the recommended b+ might differ.
Nanao use 5F13060A1 MSH1FPU07
Kortek use kfs60291
(source teknoservice)