Kraken Spinner Pre-Orders

[elvisizer]

updated instructions did the trick, got it all assembled
thanks @hursit

 

[wigsplitta]

Received safe and sound, thank you @hursit

I don't 'need' another spinner, but your products are always so well made that I couldn't resist giving this a try. Now it gives me motivation to get a spinner properly setup on my cocktail

 

[bodgit]

Just had this delivered, really nicely packed :

I've got almost everything to hand apart from those AMP/TE plugs to mate the wiring to the cabinet, which have now been duly ordered. One question, what screws would you use to mount the joysticks? M4?

 

[hursit]

Just had this delivered, really nicely packed :

I've got almost everything to hand apart from those AMP/TE plugs to mate the wiring to the cabinet, which have now been duly ordered. One question, what screws would you use to mount the joysticks? M4?

Hey my friend
yes they are M4 Screws.

 

[hursit]

Hello people
I have only 2 Sega Aero City Panels for Spinner in my stock for now. Thanks to @alberto1225
Don't miss this chance.

 

[bodgit]

Finally got around to completing the wiring harness and connecting everything up:

One thing I found was that it was necessary to rotate the spinners around 180º on the control panel otherwise the spade connectors on the P1 spinner microswitch would interfere with the control panel hinge:

The JST connectors for the spinners are a bit difficult to reach this way but they don't foul on anything.