WTB Laser Ghost Analog IO board (gun IO for Sega System 18)

[opt2not]

Looking for the Analog IO attachment board for the Sega System 18 Laser Ghost game. It's the small board that attaches to the bottom-right of the mainboard, next to the JAMMA Edge. Connects to the CN5 port on the board.

Serial number: 837-7536

Looks like this:

Let me know if you can part with one.

Thanks

 

[Ape Cosplay]

I didn't know it was also used on S18 for Laser Ghost.
That same board is used on S32 for the racing games, I've been working on reproducing it:

 

[opt2not]

I didn't know it was also used on S18 for Laser Ghost.
That same board is used on S32 for the racing games, I've been working on reproducing it:

Oh man, that looks sweet! I'd be interested in buying one off you when it's complete.

 

[Ape Cosplay]

Sure, it will be available from @Mitsurugi-w

 

[twistedsymphony]

I might have a spare original one. I'll have to check.

 

[Sp33dFr34k]

Which guns work with this IO @opt2not? Does it work with the Happ guns?

 

[ForestOfDreams]

I happen to have this as it came with my donor for my multi but I've been keeping it as someday I'd like to use the gun.
It is great to know it is being reproduced, and that it can be used on sys32.

 

[opt2not]

Which guns work with this IO @opt2not? Does it work with the Happ guns?

The guns are positional ones. So they use potentiometers for Up/Down, Left/Right (X and Y axis) aiming. For guns like Terminator 2, or Operation Wolf, mounted style. Or even the gundam sticks we have been harvesting for Monkey Ball panels.

The Happs guns are lightguns and use an optic sensor for aiming.

I might have a spare original one. I'll have to check.

Hook a brotha up!

 

[Sp33dFr34k]

The guns are positional ones. So they use potentiometers for Up/Down, Left/Right (X and Y axis) aiming. For guns like Terminator 2, or Operation Wolf, mounted style. Or even the gundam sticks we have been harvesting for Monkey Ball panels.

I was afraid that would be the case, too bad