- Thread starter tmax
- Start date
Want To Buy
J
jassin000
Lots of different speakers fit, I believe Taito discontinued the originals.
Yeah! I contacted them and they told me they have no more stock. I did find something, but really wanted to put back the original speakers...
I've even found the OEM speaker companies that made them for Taito... Toptone have something very close, in black in 4Ω, FPS only have the FPS0202N in 8Ω... and they don't sell to the public.
http://www.toptone.co.jp/en/products/full.html
https://fpsinc.co.jp/en/products/
Not cheap, but the flat panel ones seem to be on sale here:
https://www.flattspeakers.com/0202.php
Parts Express used to sell them also:
https://www.parts-express.com/FPS-0202N3R2-1-3-4-x-2-1-8-Planar-Speaker-8-Ohm-6W-292-356
I might still have replacement stock from Taito I think
Or use the dayton's,etc as pointed out
https://www.flattspeakers.com/0202.php
Parts Express used to sell them also:
https://www.parts-express.com/FPS-0202N3R2-1-3-4-x-2-1-8-Planar-Speaker-8-Ohm-6W-292-356
I might still have replacement stock from Taito I think
Or use the dayton's,etc as pointed out
Thanks for the heads up, much appreciated... I have checked them out, but they are the wrong impedance (FPS probably made a 4Ω version for Taito).
I have managed to find the right size speakers, which work ok... but am trying to go back to originals.
...but If you do have spare replacement stock and willing to part / sell a set... I would be extremely grateful.
J
jassin000
The set I removed/pulled from my L-AMI were working and original...
I think I have them in a box some place, if I can dig 'em out I'll let you know (keeping in mind they are very dusty/used).
I think I have them in a box some place, if I can dig 'em out I'll let you know (keeping in mind they are very dusty/used).
Thats right, forgot they have to be 4Ω since they are wired in series with the bottom speakers.
J
jassin000
At one time I know you were working on an add-on board for the Taito amp, assisting with input switching (I included the beta version you gave me with the Diamond I sold)...
Would it be that big of a stretch/effort to just redesign the entire thing?
Could solve the "wired in series" issue AND give us proper/multi-input switching...
Needed now more than ever with DS's CPS1 multi outputting CPS1-mono via JAMMA edge only, but CPS1.5-stereo outputting via RCA connector only.
Every time you switch games (between 1/1.5) gotta open up and swap audio cables (IF you want the best possible sound).
I can send ya another kit if you want, I still have parts to build a few more.At one time I know you were working on an add-on board for the Taito amp, assisting with input switching (I included the beta version you gave me with the Diamond I sold)...
Would it be that big of a stretch/effort to just redesign the entire thing?
Could solve the "wired in series" issue AND give us proper/multi-input switching...
Needed now more than ever with DS's CPS1 multi outputting CPS1-mono via JAMMA edge only, but CPS1.5-stereo outputting via RCA connector only.
Every time you switch games (between 1/1.5) gotta open up and swap audio cables (IF you want the best possible sound).
J
jassin000
Might be nice to have another yea... I was just dreaming big (ie total drop-in replacement for stock amp supporting multi-inputs and a base channel for true/proper 2.1) 
I guess you would need another speaker harness as well (kill that series shit).
I guess you would need another speaker harness as well (kill that series shit).
Last edited by a moderator:
jassin000... that would be absolutely awesome, and very much appreciated... I'm not fussed about them being dusty / used.
