monitor frame compatibility or not ? (toshiba / wells gardner)

[kryssss]

Hi,
I would like to know if it is possible to replace a 25 inch tube ref. Toshiba A59JMZ93X (contained with its monitor frame in an Irem Madonna candy cab) with a 25 inch tube ref. K7000 Wells Gardner?
Can I use the same monitor frame with the Wells Gardner tube ?
(my question concerns the monitor frame only, not the chassis).
If anyone has the answer, thank you very much.
Chris

 

[nem]

I've never seen a Wells with a 59cm tube. Are you sure it's not A63? 25" European / Japanese isn't the same size as 25" American.

If it's indeed a 59cm tube like the Toshiba, then sure. You will possibly have to backmount it or add some spacers to the frame to get the depth right for the bezel.

 

[kryssss]

I should have asked my question differently, sorry.

Actually, I'm looking for a monitor frame for an Irem Madonna which normally has a Toshiba/Nanao MS8-25 combo.

I saw on Ebay a 25" K7000 Arcade Monitor Frame Wells Gardner, here is the link:

https://www.ebay.com/itm/3156690641...BGF2XB3Y54RHM&hash=item497f57a9fe:g:E3oAAOSwH otmQ6oI&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKkj327PYUyph3045jhUvOZbw%2F8DstCPcMGMBcUbkqd95m%2BxjQGC5IGi4z9Vdqgekh7AKeOccoCiBE 4k2sDUAtIR2KKcQWXvZjt89MVrpmdtuxgY1DoJXeueBS60GW5mfZ16Yv2vPD0ecnnvINnMs31XqlEK6qhrRn5WunCOzWyE9%2FFYLKpkxFgAflvcFU5OblkeuV5hIMxj2J1hVT0S5U%2FTkWsogeA%2Fs2OtY8M5nWnVzmtDx%2BgFD4TvMsLXnKDKtwbows%2FAnabjUZtGVT4w3qF5WGnpj1bOLcYp7Eeu3mwcgA%3D%3D%7Ctkp%3ABk9SR6r5zYCMZQ

I was wondering if I can mount my toshiba tube on this monitor frame ?

 

[nem]

You can't. That is for a 63cm tube, not 59cm. It's too big for a Madonna.

 

[kryssss]

ok, thank you for your answer my friend !
So hard to find a monitor frame for a Madonna....