MS2930/31 Deflection Yoke Question

[sarty51]

Can I pair a MS-2931 deflection yoke with a MS-2930 chassis and 2930 tube? The values appear to be close that I found. I did not know if I would be in danger of damaging anything on my 2930 with this swap. Or would I need to modify anything on my chassis for this swap?

Thanks!

 

[garou81]

yep!! I have done this many times.

 

[phokkun]

the 2930, 2931, 2933 and 2934 are pretty much interchangeable.

I had to change the heater resistor on a 2934 once, but that was about it. The yokes seem to be the same for the most part.

 

[sarty51]

Awesome thank you guys for the confirmation on that.