triforce7770
Student
Ok my ms2930 hates me big time now. Was working great after recap and was changing out the yen cover metal piece and this happen all of the sudden. Sounds like HV arcing and has a deflection/sync issue. Looked at the back of the chassis and dont see any arcing at all. Tested while it was running and got 10kv on my BK HV probe. Now when I turn it on I get no hv at all.
If I wait a couple of minutes it will have that arcing sound and immedialty shut off hv. Recently did a cap kit on it and was working fine until now.
Also checked for shorts in my guns just to be safe and no shorts and all of the gun test good on my bk 467.
Also tried 15khz and same issue.
Heres a vid of the problem. This is running at 31khz vga.
View: https://youtu.be/V9OJDcymPVU
If I wait a couple of minutes it will have that arcing sound and immedialty shut off hv. Recently did a cap kit on it and was working fine until now.
Also checked for shorts in my guns just to be safe and no shorts and all of the gun test good on my bk 467.
Also tried 15khz and same issue.
Heres a vid of the problem. This is running at 31khz vga.
