MS2934 Flyback replacement

[LazerFlux]

So I've got an MS2934 that appears to have a bad flyback.
board's recapped and continuity tested, transistors appear fine. 180V @31KHz pin on the flyback is not outputting.
The labels on both flybacks I have as samples are long since worn.

The service manual I've been able to locate does not a part number for the flyback, so I'm not 100% on which flyback it actually is.

Does anyone know what flyback is in this? is it the same one as the 2931/2932?
Or does anyone have a more complete service manual, with a BOM?

I'm looking at this as a possible replacement, assuming the above is true. https://www.ebay.com/itm/223543070073
I know that these are not as high quality as the originals, however finding a replacement flyback that's NOS appears to be impossible, or I'd have to buy a whole chassis for quite a bit of cash.

Thank you for any knowledge imparted.

 

[trashedcabs]

I don't have an exact answer for you since I don't have a 2934 on hand, but if you do find that the MS2931 flyback is the same, I have 3 non-working chassis here all with different issues and I'd be willing to let one go at cost.

 

[LazerFlux]

I don't have an exact answer for you since I don't have a 2934 on hand, but if you do find that the MS2931 flyback is the same, I have 3 non-working chassis here all with different issues and I'd be willing to let one go at cost.

Thank you! I'll let you know. Hopefully that is indeed the case

 

[LazerFlux]

I don't have an exact answer for you since I don't have a 2934 on hand, but if you do find that the MS2931 flyback is the same, I have 3 non-working chassis here all with different issues and I'd be willing to let one go at cost.

I've asked an expert and received a tentative answer that the MSU1FUS11 from the MS2930 and MS2931 should be compatible. Up for an experiment?