MS9-29FN22 cap identification on 05A00585D1 chassis

[csonesz003]

Hey everyone,

I recently picked up a Nanao beauty, but I noticed that someone had already recapped it and done a bit of work on the board.
I ordered the cap kits based on the list here: https://wiki.arcadeotaku.com/w/Nanao_MS-9_capacitor_listing (also found the same listing in a few other places).

The thing is, the caps currently on my board are a little different in terms of their uF values compared to what's listed above under the link.
Does anyone here have this exact version of the board and can confirm if the cap list on the site above matches what's actually populated?

Would appreciate any insight — thanks!

 

[trashedcabs]

Lists should be treated purely for reference only. Always replace with the same values as what came out.

If one of your questions is about C951, many kits come with 220uf instead of 180uf. It's fine to use the 220uf in this case.

 

[csonesz003]

The board was fully recapped by someone else (no idea who did it).
When I compare the caps on it to the ones listed on Arcadeotaku, they're slightly different.
My guess is that whoever did it, didn't really pay much attention to matching the exact values and currently I don't have any references to check what exactly I need for this board.