MS9-29S Capacitor replacement

[supabok]

I'm looking at recapping my Nanao MS9-29S chassis and looking at the cap list there's one capacitor I cannot find a new replacement for:
C955 180uf 25v

Is it ok to use a 220uf 25v in place of this one? Curious what the general rule is for replacements as this is all new to me

thanks

 

[Sp33dFr34k]

I wouldn't... upping the voltage is okay though so check if you can find a higher voltage rated 180uf. Just make sure it physically fits.

 

[supabok]

Got it! Thank you for the tip

 

[triforce7770]

Mouser has a few https://www.mouser.com/c/passive-co...yle=Radial&voltage rating dc=25 VDC&instock=y

 

[nem]

220uF is fine, and I've seen both (180uF and 220uF) fitted from factory.

 

[Sp33dFr34k]

220uF is fine, and I've seen both (180uF and 220uF) fitted from factory.

Cool, I did not know that, my comment above was meant more as general info

 

[supabok]

Thank you all for the helpful advice & info!!