Thank you for the details @bagheera369 
FS MS9 (NAC/Egret 2) + Toshiba PF (NNC) Yoke Flip Kits
- Thread starter FrancoB
- Start date
For Sale
If you need a link I can find one for you.
That would be brilliant, thank you!
bagheera369
Champion
Did you order from the link I gave above? All good?
Yes I used your link and all is good, thank you!
Awesome.
tanoris
Student
In for 1 astro city if still available!
AlxUnderBase
Enlightened
Check if you can do it (if your Astro use MS9-29 chassis , there is linked to order form) :
I've now created a Google form to capture data/orders and with information on shipping rates etc. If you're interested or you've already expressed interest then please fill in the details in the link below:
[MS9 Yoke Flip Kit Information and Order Form]
Thanks!
tanoris
Student
Ah yes, I did check the sticker on my monitor, it stated it was an MS9-29S so I submitted a form.
FrancoB
Champion
Thanks for filling the form in @tanoris and thanks for the assist @AlxUnderBase
I can get you one made but it will most likely be in the new year if you're happy to wait until then?
I can get you one made but it will most likely be in the new year if you're happy to wait until then?
tanoris
Student
That’s totally fineThanks for filling the form in @tanoris and thanks for the assist @AlxUnderBase
I can get you one made but it will most likely be in the new year if you're happy to wait until then?
ebenezer
New User
It’s quite late, but I would like to purchase kits for the Egret 2. I have filled out the Google Form.
FrancoB
Champion
I'm afraid I'm all out of parts for these. If I can free up some time amongst other projects I might be able to do another run.
I would need interest for at least 10 kits to get more parts ordered. I have interest from one other person at the moment. If I get interest on the form for approx 8 kits then I'll see what I can do. Thanks.
I would need interest for at least 10 kits to get more parts ordered. I have interest from one other person at the moment. If I get interest on the form for approx 8 kits then I'll see what I can do. Thanks.
RepairGuy95
Champion
These would work for a nnc too in theory?
FrancoB
Champion
Toshiba PF D29C051? I've not had a NNC myself but looking at some initial chassis pictures I would say yes, in theroy. It looks like there are two * 2-pin headers for the horizontal and vertical yoke connectors and they look to be the same/similar as the ones used on MS9 but would need to confirm the pitch and header pin diameter.... or someone else may know if the 'standard'/MS9 yoke connectors fit.
It's the same connectors.