Hello all! Just posting up some pictures of my current project. I'm installing MK1, MK2+, and a pandoras box into an Ultimate MK3 cabinet. I'll still have 4 slots left....thinking about Mistercade potentially in the future...any other pcb suggestions for the remaining 3 slots? Shout out to Mitsurugi and Jim Riddle for helping me get this going!
Multi PCB Fun
- Thread starter KenKaniff
- Start date
Well, have my measurements gtg looks like to build the slides for the pcbs...just need to rewire mk1 sound harness for a little bit more length and can get clearance to mount the pcbs on mk1 and mk2+ side by side. I was all worried about the kick harness in the cabinet but after looking at wiring in the manual it appears the gray wiring on a harness labeled player 4 isn't even hooked up to anything where it pops back out of main cabinet harness, lol. Not quite sure why was hooked up at all...?
Attachments
So made a bit of progress over time...here's some pics. Went with an Extron auto switch to switch between the multi jamma boards and the pandoras box seamlessly and to increase the brightness levels. I did not have to modify anything internally in the cab myself besides some screws put into the inside so I can restore it to original spec easily still if wanted by the owner.
Attachments
arcadeaction
Professional
a recalbox jamma would be a suggestion also