ArcadeBattler
Beginner
Hello,
I have a 2 slot MVS board which I need help getting sound working again.
Currently, sound within the test menu works no problem, but I can't get sound from any cartridges.
I have already:
-recapped the board
-swapped the z80
-swapped the bios
I have the following tools available to me:
-soldering station/smd rework station
-multimeter
-logic probe
-Oscilloscope
Any help would be greatly appreciated. Furthermore if chip locations/pin numbers could be included in suggestion that would greatly help, as I have never repaired a neo geo before and I am not fully confident in what is what.
Thanks!
I have a 2 slot MVS board which I need help getting sound working again.
Currently, sound within the test menu works no problem, but I can't get sound from any cartridges.
I have already:
-recapped the board
-swapped the z80
-swapped the bios
I have the following tools available to me:
-soldering station/smd rework station
-multimeter
-logic probe
-Oscilloscope
Any help would be greatly appreciated. Furthermore if chip locations/pin numbers could be included in suggestion that would greatly help, as I have never repaired a neo geo before and I am not fully confident in what is what.
Thanks!