GhaleonUnlimited
Enthusiast
My board was working 100% no problem, but now for some reason:
-1P start won't work
-2P right won't work
I tried soldering a wire (separate from the JAMMA harness) from the board's JAMMA IP start and 2P right contact to the button/switch directly, and it still doesn't work.
The board has this issue in whatever machine/supergun I test it on, and other games work fine. Have cleaned the PCB contacts and they were pretty clean already.
When I apply strong pressure to the JAMMA harness, I can get 2P right to work, but not 1P start.
This issue happened after moving the machine, but nothing out of the ordinary happened when moving.
I need this board functional for an event this week
I've never encountered this problem before.
I would love any advice!
-1P start won't work
-2P right won't work
I tried soldering a wire (separate from the JAMMA harness) from the board's JAMMA IP start and 2P right contact to the button/switch directly, and it still doesn't work.
The board has this issue in whatever machine/supergun I test it on, and other games work fine. Have cleaned the PCB contacts and they were pretty clean already.
When I apply strong pressure to the JAMMA harness, I can get 2P right to work, but not 1P start.
This issue happened after moving the machine, but nothing out of the ordinary happened when moving.
I need this board functional for an event this week
I've never encountered this problem before.I would love any advice!