Namco System 246 model C ,Ridge Racer V and MP07-IONA-US JVS

[chacal231077]

Hi!

I wanted to know if anyone was able to get Ridge Racer V to work on a Namco System 246 model C and an MP07-IONA-US JVS ?

THANKS

 

[mokona]

If you have a dongle that bypasses the motor check, the IONA-US alone will work.
However, the IONA-US handle input has a lot of play in the center and is difficult to operate.
You can create a handle that can be operated comfortably by wiring it yourself using the FCA PCB.

 

[chacal231077]

If you have a dongle that bypasses the motor check, the IONA-US alone will work.
However, the IONA-US handle input has a lot of play in the center and is difficult to operate.
You can create a handle that can be operated comfortably by wiring it yourself using the FCA PCB.

Thank You