FelizGato
Student
I purchased everything I needed for Namco system 256 (using OpenJVS). When I boot the system there is no sound or video and my TV says "wrong format". What's the problem?
View: https://youtu.be/jbErre4Cge4
Namco system 256 no sound and image
- Thread starter FelizGato
- Start date
Franco23444
Grand Master
The 2X6 will not boot up with out a game in the system. Also, some games support 480p resolution via dip switch settings. Normally the system will display in 15khz 480i/240p resolution which most modern VGA compatible displays can’t process hence why you’re getting “invalid format” on your display.
FelizGato
Student
I need to find another monitor?
Franco23444
Grand Master
No, you can use a converter instead. Something like the GBS-8200 will work and is currently the cheapest converter to buy.
FelizGato
Student
Thanks. And what does the rapid orange light near the dongle mean?
Franco23444
Grand Master
It’s a HDD indicator light. Looks like a HDD is plugged in. If it was a dvd drive, the HDD indicator light would be off and the green led would be the only light on.
FelizGato
Student
I have this TV, my bro said it should work with sys, but there is no vga. Can I use vga to hdmi converter? Will it work in this way?
Attachments
ArcSys101
Grand Master
Put all the dipswitch 234 in on position and put the vga cord direct to the namco system 256
Plus what is the game in the system if it's like soul calibur 2 or 3 open the metal case you can see that there is a 246+/256 jumper in desire game like tekken 5 the jumper tab must be in 256 mode
Plus what is the game in the system if it's like soul calibur 2 or 3 open the metal case you can see that there is a 246+/256 jumper in desire game like tekken 5 the jumper tab must be in 256 mode
FelizGato
Student
It's cobra the arcade
Franco23444
Grand Master
Cobra the arcade is a 480i game. You’ll definitely need an upscaler video converter