What's new

Ali710

Student
Joined
May 13, 2019
Messages
65
Reaction score
4
Location
Bahrain
Hello guys,
Anything can be done about this broken pot? Replace? Or can be adjusted by any means?

I really need to adjust PARA 🥺, last adjustment to the monitor.

https://ibb.co/syS3vt5
 

_rm_

Student
Joined
Jul 21, 2015
Messages
60
Reaction score
34
You can simply replace them, the value should be 3.3k or 6.8k if i'm not mistaken.
I've read you can use 5k, i think it's easier to find.
 

Ali710

Student
Joined
May 13, 2019
Messages
65
Reaction score
4
Location
Bahrain
Hello guys,
Anything can be done about this broken pot? Replace? Or can be adjusted by any means?

https://ibb.co/syS3vt5
You can simply replace them, the value should be 3.3k or 6.8k if i'm not mistaken.
I've read you can use 5k, i think it's easier to find.
You mean desolder and use from another chassis? I already got another chassis which lots of work
 

dewmansnk

Professional
Joined
Dec 1, 2017
Messages
254
Reaction score
495
Location
SoCal
Re-using an old pot might not be the best idea. They get corroded and less accurate over time, so while this might fix your issue in the short term, you might just be adding headaches later on.
 

_rm_

Student
Joined
Jul 21, 2015
Messages
60
Reaction score
34
Re-using an old pot might not be the best idea. They get corroded and less accurate over time, so while this might fix your issue in the short term, you might just be adding headaches later on.
This. You better try to source a new replacement online.
 
Top