What's new
By:

Naomi 2 repair log

Thanks for the tips guys! I went ahead and changed ic9 and ic20 and everything checked out now with a Naomi 1 game. I also just changed 116 and 118 and my Naomi is happily back to working order WOOOHOOO. It’s not slow as piss and is loading now. Wish I had the skills back then before I sold my twin initial d 3 🥹
 
Last edited:
Going for it ; had another one that didn’t play Naomi 2 games and all the rams were changed
 

Attachments

  • IMG_1115.jpeg
    IMG_1115.jpeg
    342 KB · Views: 120
  • IMG_1116.jpeg
    IMG_1116.jpeg
    216.1 KB · Views: 119
Last edited:
hrvat9 said:
Going for it ; had another one that didn’t play Naomi 2 games and all the rams were changed
Click to expand...
Nice. What tools did you use for taking it off? and how do you plan to do the reballing? I might be in the same situation but not sure how to do it so I'm watching closely
 
MagicianLord77 said:
Nice. What tools did you use for taking it off? and how do you plan to do the reballing? I might be in the same situation but not sure how to do it so I'm watching closely
Click to expand...
Hot air station; would not recommend if you’re not experienced

I just got solder balls in different sizes to see which fits best on the pads
 
Got it back on the board but maybe I didn’t get it seated all the way; the red led is blinking while the fans are trying to spin but can’t. They’re like shaking back and forth

Edit : looks like I shorted the 3.3v rail somehow as the wire from the pay is getting hot
 
Last edited:
You must log in or register to reply here.
Back
Top