Aaronr33 Student Joined Sep 11, 2019 Messages 89 Reaction score 49 Location Canada May 12, 2020 #1 How would i test the yoke, horizontal circuit on my neotec monitor. It keeps blowing HOT, b+ circuit is fine (tested with 100W light bulb). Also flyback is newish, so im left with possible bad yoke?
How would i test the yoke, horizontal circuit on my neotec monitor. It keeps blowing HOT, b+ circuit is fine (tested with 100W light bulb). Also flyback is newish, so im left with possible bad yoke?
G gunblade Student Joined Apr 1, 2017 Messages 116 Reaction score 85 May 13, 2020 #2 have you tested hv caps yet? difficult to prove yoke as they can corrode and read ok but as soon as energized they can short, testing with another chassis is pretty much only way
have you tested hv caps yet? difficult to prove yoke as they can corrode and read ok but as soon as energized they can short, testing with another chassis is pretty much only way
