WTB Netdimm with PiForce Jamma
- Thread starter Dims.
- Start date
Want To Buy
AMS
Grand Master
Oké let me make this clear and easy for others.
so you need a:
4.01-4.02 net dimm and patch cable
Pi force loader With games and power cable
Jvs to Jamma Adapter?
do you already have a Naomi with the right bios to boot?
mei you already have the right psu for the set
so you need a:
4.01-4.02 net dimm and patch cable
Pi force loader With games and power cable
Jvs to Jamma Adapter?
do you already have a Naomi with the right bios to boot?
mei you already have the right psu for the set
Hey guys thanks for the replies! I don’t have a net dimm currently so looking to buy that as well! Was hoping to get something like the all in one kits that include everything I need to get started, but not at crazy prices like I seen on eBay.
I have a blast city cabinet currently hooked up to a Pandora’s box 3 of that helps. Let me know if I need to provide more info.
Thank you guys!
I have a blast city cabinet currently hooked up to a Pandora’s box 3 of that helps. Let me know if I need to provide more info.
Thank you guys!
@Dims. I’m sure someone could help you out with a good chunk of parts. Main challenge is to find a reasonably priced NetDimm.
If you can’t get a kit then I wouldn’t worry - everything else is pretty straightforward to pickup or have others assist with.
To expand on @AMSs post above you need
1x Rasberry Pi 3 Model B
1x RPi PSU (see below)
1x Ethernet cable
1x Micro SD card with appropriate image
1x Zero key (see below)
You may also need:
1x Naomi Multi-region Bios
1x Adafruit shield if you want that option
( @twistedsymphony can help with a 3D printed case for that)
There are lots of threads to make your setup easier:
Naomi-2-RasPi power harness
You could probably ask here if someone could burn you a Zero Key (May also be able to provide a new Bios as well).
How to Create a Zero Key (PIC) For Net Booting and CF on NAOMI Chihiro and Triforce
For software I’m sure we can find a ready to go SD card image somewhere.
If you can’t get a kit then I wouldn’t worry - everything else is pretty straightforward to pickup or have others assist with.
To expand on @AMSs post above you need
1x Rasberry Pi 3 Model B
1x RPi PSU (see below)
1x Ethernet cable
1x Micro SD card with appropriate image
1x Zero key (see below)
You may also need:
1x Naomi Multi-region Bios
1x Adafruit shield if you want that option
( @twistedsymphony can help with a 3D printed case for that)
There are lots of threads to make your setup easier:
Naomi-2-RasPi power harness
You could probably ask here if someone could burn you a Zero Key (May also be able to provide a new Bios as well).
How to Create a Zero Key (PIC) For Net Booting and CF on NAOMI Chihiro and Triforce
For software I’m sure we can find a ready to go SD card image somewhere.
Been getting into Naomi lately. Have had one for ages but never really used it much. Obtained a net dimm recently, looked into net booting, now it's getting used a lot!
Started with the mobile phone version but received this LCD touchscreen module and case for the Rpi and it is sensational! Love the software, works very well.
