I have a pair of nice, rebuilt SNK LS-30 rotary joysticks with their harnesses (1st picture). 1 joystick was completely disassembled and had the PCB replaced. The other one I could not disassemble all the way to the PCB, but it was cleaned up and tested to be working perfectly. Both joysticks were tested with my Time Soldiers PCB. Both joysticks had the rotation stopper peg turned (3rd picture) so they don't have the slop in the rotary function that comes from the peg being worn from years of use. Both joysticks have a new spring installed (2nd picture). The springs are Ultimarc Ultrastik 360 Hard Springs which look and feel darn near identical to the original spring. I made replacement caps for the knobs (4th picture). They look very close in color and appearance and they don't require a tool to remove them. Just turn the joystick over and they will shake out. Makes it very convenient and they won't come out when installed and being used. The last 2 attached pictures are comparisons of the knobs with my replacement caps to knobs with original caps. Only the replacement cap knobs shown on the assembled joysticks are included.
$300 shipped in the USA via PayPal F&F…
$300 shipped in the USA via PayPal F&F…
