tiff_lee
Grand Master
Ok so the Rave Racer cab I just picked up has some CRT issues, so apart from the obvious get the chassis serviced I think I have some issues outside of that (although possibly not)
The CRT is a Pentranic A79PNT25X, I can't find any identifying marks on the chassis i'll need to take a better look but the neck board has RODO JW07, Rodotron? There is a remote board for all adjustments bar R/G/B gain behind the dashboard.
Few observations so far
Just realised some of my pics are garbage but here's a couple to get me started.
The CRT is a Pentranic A79PNT25X, I can't find any identifying marks on the chassis i'll need to take a better look but the neck board has RODO JW07, Rodotron? There is a remote board for all adjustments bar R/G/B gain behind the dashboard.
Few observations so far
- The brightness was cranked right up on the monitor and turning it down to 'normal' levels results in the image starting to fade away on the left and ultimately just (raster?) lines across the screen
- The pics don't show it but the image doesn't look level across the screen, like it is slanted almost.
- Appears to be some vertical black lines across the image
- Unable to reduce horizontal width sufficiently (assumed this to be a chassis/servicing issue)
Just realised some of my pics are garbage but here's a couple to get me started.